Quick Start Guide

Appendix 2 Overview of Settings and Functions
A4
Convenience Functions
If the appropriate timebase or measurement range is unknown
Auto-Ranging Function
See "3.3.5 Automatic Range Setting (Auto-Ranging Function)" in the
Instruction Manual
Automatically selects the timebase and range settings to display 1 to 2.5
waveform cycles.
To record and search for waveform anomalies:
Trigger Function and Waveform Search Function
See "Chapter 6 Trigger Settings", "8.14 Searching a Waveform" in the
Instruction Manual
Trigger signals can be generally be obtained from the following sources: An-
alog trigger, logic trigger, external trigger, timer trigger and forced (manual)
trigger. A trigger can be applied as a result of one or a combination of these
criteria, except for the Manual trigger.
Also, after measurement, any waveform can be searched and displayed us-
ing the Search function.
T TT T
T T
To display with actual measurement units or to fix the display level of the waveform
Scaling Function
See "5.4 Converting Input Values (Scaling Function)" in the Instruction
Manual
Input values can be converted and displayed as physical values such as
speed, vibration, displacement and temperature. Two conversion methods
are available: setting by conversion ratio and setting by entering equivalent
values at two points.
Variable Function
See "8.9.4 Setting Arbitrary Waveform Height and Position on the Vertical
(Voltage) Axis (Variable Function)" in the Instruction Manual
The position and size of the displayed waveform can be freely set.
By entering the upper and lower limits of the waveform, it can be set to
display with full-screen amplitude.
The Scaling and Variable functions can be used in combination. The full span
of output from a sensor can be displayed.
mV
A
0%
100%