User Manual

4.2 Setting Measurement Configuration (Status Settings Screen)
97
4
Chapter 4 Measurement Configuration Settings
Description Setting Range of Recording Length
(Memory Function)
1 to 10,240,000 (divisions)
The setting range depends on the capacity of installed memory and the number
of channels in use.
(Recorder Function)
1 to 160,000 (divisions)
The setting range depends on the capacity of installed memory.
See "Appendix 2.4 Memory Capacity and Maximum Recording Length" (⇒ p. A37)
"Appendix 2.3 Timebase and Maximum Recordable Time" (
⇒ p. A32)
3
2
Displayed recording time and maximum
recording length are linked to the record
-
ing length setting.
Set Arbitrary Recording Length (User Shot)
To open the screen: Press the SET key → Select with the SUB MENU keys →Status Settings screen
See Screen Layout (
⇒ p. 27), To set from the Waveform screen (⇒ p. 108)
Operating Key Procedure
1
(With Memory function)
SHEET/PAGE
Select the [Basic] page.
2
Select the setting method for recording length.
CURSOR
Move the cursor to the [Shot] item.
F2
Select [User] (Arbitrary).
3
Set the recording length.
CURSOR
Move the cursor to the [User Shot] (Arbitrary re-
cording length) item.
F1 to F8
Specify a recording length.
[↑↑], [↓↓]: Increments and decrements the value
by 10 steps
See"Entering Numbers" (
⇒ p. 64)
Maximum Recording Length [Divisions]
Installed Memory
(Words)
No. of Chs Used
8860
168421
8861
32 16 8 4 2
32M
64M 20,000 40,000 80,000 160,000 320,000
128M
256M 80,000 160,000 320,000 640,000 1,280,000
512M
1G 320,000 640,000 1,280,000 2,560,000 5,120,000
1G
2G 640,000 1,280,000 2,560,000 5,120,000 10,240,000
Maximum Recording Length [Divisions]
Installed Memory
(Words)
Other than the Model 8958 16-Ch
Scanner Unit
Model 8958 16-Ch Scanner Unit
8860 8861
32M 64M 5,000 1,000
128M 256M 20,000 5,000
512M 1G 80,000 20,000
1G 2G 160,000 40,000