User Manual

4.3 Acquiring Waveforms Using the Utility Functions
104
2
3
4
1
5
Memory Division: Recording Settings
To open the screen: Press the SET key → Select with the SUB MENU keys →Mem Div Settings scree
n
See Screen Layout (⇒ p. 35)
Operating Key Procedure
1
Enable the Memory Division function.
CURSOR
Move the cursor to the [Memory Div] item.
F2
Select [On].
2
Set the recording length.
(This is linked to the recording length setting on the Status Set-
tings screen.)
CURSOR
Move the cursor to the [Shot] item.
F1 to F8
Set the recording length.
The maximum recording length and number of divi-
sions are determined automatically according to
memory capacity and the number of channels
used.
Setting range: "Appendix 2.5 Recording Length
and Maximum Number of Divisions (Memory Divi-
sion function)" (
⇒ p. A40)
3
Set the number of divisions.
CURSOR
Move the cursor to the [Division] item.
F1 to F8
Set the number of blocks for division.
Default setting: 2
Changing the recording length on the Status Set-
tings screen changes the number of divisions.
4
Set the start block.
CURSOR
Move the cursor to the [Start Block] item.
F1 to F8
Set the block number at which to start recording.
Default setting: 1
5
Set the Used Block number.
CURSOR
Move the cursor to the [Use Blocks] item.
F1 to F8
Set the number of blocks to use.
Default setting: 1
1
Off Memory Division is disabled.(default setting)
2
On Memory Division is enabled.
About Recording
When a fast timebase is selected, display-
ing, printing and saving operation are not
available while measuring.
Selecting the display screen for auto sav-
ing lengthens dead time.
To display any block on the waveform screen when finished measuring:
Set the number of blocks to display. (This can also be set on the Waveform screen.(⇒ p. 213))
To display overlaid waveforms:
Set the number of blocks for reference. (⇒ p. 105)
Use Blocks (Blue)
Maximum number of
divisions
Map
Allows confirming
block usage
status.
Memory Division and Waveform Calcu
-
lation cannot be enabled at the same
time.
When the number of divisions is 32, the
Start Block is 5 and the Used Block num-
ber (number of blocks to use) is 20
No. of Divisions
Start Block
List
Allows confirming informa
-
tion such as the trigger tim
e
of each block.(⇒ p. 106)