User Manual

4.4 Setting Measurement Configuration on the Waveform Screen
108
The following measurement configuration settings can be made on the Wave-
form screen. These can be changed while measuring.
• Timebase and recording length of the Status Settings screen
• Time axis display magnification
• Waveform zoom
• Trigger criteria
("6.12 Making Trigger Settings on the Waveform Screen" (⇒ p. 161))
Setting choices depend on the operating function. Refer to each setting on the
Status Setting screen for details of setting choices.
Also refer to "Chapter 9 Measuring with Real-Time Saving" (⇒ p. 225) for
details about the function.
Refer to the Analysis Supplement for FFT function details.
Use the CURSOR keys to move the cursor to each setting item, and select your
choice with the F keys.
Press the SUB MENU keys to change available setting items (⇒ p. 21).
4.4 Setting Measurement Configuration on the
Waveform Screen
21
4
5
Memory Function
3
Sampling Rate
(When Timebase 2 is selected,
the sampling rate of Timebase
2 is displayed)
Selectable when the Overlay function is
enabled (⇒ p. 101).
Recording Duration
"6.12 Making Trigger Settings on the
Waveform Screen" (
⇒ p. 161)
214
6
Recorder Function
3
"To pause and restart printing (during Real-Tim
e
Printing) (Recorder Function only)" (⇒ p. 302)
Setting Items Description Selection Choices
1
Function
Memory Function Recorder Function
2
Time
(Timebase)
(
⇒ p. 89)
(Button) Selects the sampling clock.
Internal (INT) or
External (EXT)
(cannot be selected)
(Setting
column)
Sets the input signal acquisition rate.
The setting value is time per division.
(⇒ p. 90) (⇒ p. 90)
3
Shot
(Recording
Length)
(⇒ p. 95)
(Button)
Specifies the recording length setting
method.
Fixed or User Fixed, User, or Cont
(Setting
column)
Sets the recording length (number of divi-
sions) for each acquisition operation.
(⇒ p. 95) (⇒ p. 95)
4
Mag
(Magnifica-
tion)
(⇒ p. 204)
(Button)
Selects viewing the waveform of the en-
tire recording length on one screen.
Whole Wave Whole Wave
(Setting
column)
Selects magnification on the horizontal
axis (time axis).
Overall fluctuations can be quickly seen
by compressing
21 steps
from x 10 to 1/500,000
(Magnification/Com-
pression)
16 steps from x 4 to 1/20,000 (Compres-
sion Only)
(with timebase settings between 10 and
50 ms/div, the measured waveform is
displayed as compressed regardless of
the magnification setting)
5
Zoom
(
⇒ p. 206)
(Button)
Magnifies a section of a waveform.
Turn [On] when you want to zoom.
On or Off _________
(Setting
column)
Set the magnification ratio.
x 10 to 1/200,000 _________
6
Print
(
⇒ p. 302)
(Button) Stops or resumes real-time printing. _________ Pause Print/ Restart Print
(Setting
column)
When resuming printing, set how many
divisions to retrace for printing.
_________ -15 to 0 div