User Manual

5.2 Adding Comments
113
5
Chapter 5 Input Channel Settings
Comments added for each channel can be displayed on-screen. Comments can
also be printed on recording paper.
Allowed number of characters: up to 40
Make settings on either the [One Ch] page or the [Comment] page.
To display comments on the Waveform screen:
Enable comment display from the Environment (Env) Settings screen (Default setting: Off).
See "12.1.2 Displaying or Hiding Comments" (⇒ p. 335)
To print comments with measurement data:
Set on the Print Settings screen.
See "11.6.5 Printing Comments and Setting Data" (⇒ p. 321)
5.2.2 Adding Channel Comments
Channel Comments
To open the screen: Press the SET key → Select with the SUB MENU keys →Channel Settings scree
n
See Screen Layout (⇒ p. 31)
To set on the [One Ch] page (only analog channel comments)
Operating Key Procedure
1
SHEET/PAGE
Select the [One Ch] page.
2
CURSOR
Move the cursor to the [Comment] item.
3
F1 to F8
Enter comment text.
See "Entering Text and Comments" (
⇒ p. 65)
"Comment Entry Example" (
⇒ p. 114)
To enable on the [Comment] page (both analog and logic chan-
nel comments)
Operating Key Procedure
1
SHEET/PAGE
Select the [Comment] page.
2
CURSOR
Move the cursor to the [Comment] entry column
for [Analog] or [Logic] channels.
3
F1
Enter comment text.
See "Entering Text and Comments" (⇒ p. 65)
"Comment Entry Example" (
⇒ p. 114)
Comment entry column for logic chan
-
nels
Displaying comments on the Waveform screen
Set the [Display Comments] setting [On] on the Env Settings screen.
(⇒ p. 335)
Comment entry column for analo
g
channels
Copy a comment from one channel to another?
Comments can be copied on the [Comment] page.
See "Copying Comments" (⇒ p. 115)