User Manual

5.2 Adding Comments
114
Comment Entry Example________________________________________
The virtual keyboard is used to enter comments with the operating keys or a
mouse.
See "Using [Edit] for Entry" (⇒ p. 66)
In this example, we enter the comment “LINE-1” in the Comments field on
the [One Ch] page.
1 Use the CURSOR keys to move the cursor to the Comments field, and press the
F1 [Edit] key.
The virtual keyboard appears.
2 Use the CURSOR keys to move the cursor to “L”, and press the F1 [Set] key.
The letter “L” appears in the entry field.
3 Continue entering the same way.
• To change character sets, press the F8 [Character set] key to switch the entry
mode (Virtual Keyboard Entry Modes) (⇒ p. 67)).
• To insert a character between existing characters: Use the F4 and F5 keys to
move the cursor to the entry point, and enter a character as in Step 2.
• To delete a character: Use the F4 and F5 keys to move the cursor (underline)
to the character following the one you want to delete in the entry field, and
press the F2 [BS](Backspace) key.
• To delete all entered characters: Press the F3 [Clear] key.
4 When finished entering, press the F6 [OK] or the ENTER key.
The characters are accepted and the virtual keyboard is closed.
To revert to the previous field contents, press the F7 [Cancel] key.
Comments Field
LINE