User Manual

5.5 Verifying and Setting All Channels from a List
123
5
Chapter 5 Input Channel Settings
All channel settings can be verified and changed on the following Channel
screen pages.
In addition, settings can be copied between channels. (⇒ p. 127)
5.5 Verifying and Setting All Channels from a
List
Set analog channels (⇒ p. 110).
Set logic channels (⇒ p. 177).
Comment Settings List (⇒ p. 123)
Analog Channel Settings List (⇒ p. 124)
Analog Channel Scaling Settings List (⇒ p. 125)
Analog Channel Variable (arbitrary magnific
a-
tion of vertical axis) Settings List (⇒ p. 126)
S
witch with the
S
HEET/PAGE keys.
Comment Settings List: [Comment] Page
To open the screen: Press the SET key→ Select with the SUB MENU keys →Select the [Comment]
page with the
SHEET/PAGE keys
Analog Channel Comment List
(⇒ p. 113)
Logic Channel Comment List
(⇒ p. 113)
Using the CURSOR keys, move the cursor to the [Ch] column.
• To enter a title or comment:
Select F1 [Edit] to enter characters from the virtual keyboard.
See"Entering Text and Comments" (⇒ p. 65), "Comment Entry Example" (⇒ p. 114
)
(If a keyboard is connected, you can press the F2 [Direct] key and enter from
the keyboard directly.)
• To copy settings from one channel to another:
Select F7 [Copy].
Title comments can be entered
.
(⇒ p. 112)
This mark indicates
settings are valid.