User Manual

5.5 Verifying and Setting All Channels from a List

126

Variable Settings List: [Variable] Page

To open the screen: Press the SET key → Select with the SUB MENU keys →Select the [Variable] pag

with the SHEET/PAGE keys

Using the CURSOR keys, move the cursor to the [Ch] column.

• To set the Variable function:

Select F1 [All Settings] and set from the dialog.

(Each setting can be made when the cursor is moved to the setting item.)

Setting choices are the same as on the [One Ch] page.

See"8.9.4 Setting Arbitrary Waveform Height and Position on the Vertical (Voltage)

Axis (Variable Function)" (

⇒ p. 208)

• To copy settings from one channel to another:

Select F2 [Copy].

This mark indicates settings

are valid.

Per Division Setting Upper/Lower Limit Setting