User Manual

5.6 Copying Settings Between Channels
127
5
Chapter 5 Input Channel Settings
5.6 Copying Settings Between Channels
Copying Channel Settings
Settings can be made on the [Comment], [All Ch], [Scaling] and [Variable] pages of the Channel Setting screen.
Operating Key Procedure
1
Open the dialog.
CURSOR
Move the cursor to the source unit (module) and
channel.
F2
Select [Copy].
The [Copy Settings] dialog appears.
2
Select the copy source channel.
CURSOR
Move the cursor to the [Copy Source] item.
F1 to F8
Select the unit and channel number of the copy
source.
3
Select the contents to copy.
CURSOR
Move the cursor to the [Copy Contents] item.
F1 to F8
Select the contents to copy.
Contents differs according to the page.
4
Select the copy destination channel(s).
CURSOR
Move the cursor to the [Copy Destination] item.
F1 to F8
Select the unit and channel number(s) of the
copy destination.
5
Execute the copy.
F7
Select [Copy].
The selected contents are copied.
2
3
4
Unit and channel of copy destination
Unit and channel of
copy source
Copy Contents
(depends on the setting page)
Selections can be made using the but-
tons in the dialog.
Move the cursor to a button, and press
the
F1 key.
•
Select All
Selects all channels as copy destina-
tions.
•
Deselect All
Deselects all copy destinations.
•
Reverse
Reverses selected and deselected
settings.
•
Copy
Executes the copy process.
•
Cancel
Cancels the copy process.
1