User Manual

6.12 Making Trigger Settings on the Waveform Screen
161
6
Chapter 6 Trigger Settings
The following trigger criteria settings can be made on the Waveform screen.
Press the SUB MENU keys to select available setting items.
• Trigger Mode
• Pre-Trigger (Memory function and FFT function only)
• Analog Trigger (settings depend on the trigger type)
Use the CURSOR keys to move the cursor to each setting item, and select your
choice with the F keys.
6.12 Making Trigger Settings on the Waveform
Screen
1
Memory Function
4
Analog Trigger Settings
57
10
689
1
Memory Function
23
"4.4 Setting Measurement Configuration on the Waveform Screen" (⇒ p. 108)
Measurement Configura-
t
ion and Trigger Settings
SUB MENU key
11
1457
10
Recorder Function
89
11
6
Setting Items Description
1
Function
2
Trigger Mode (⇒ p. 132) Sets the trigger mode.
Single, Repeat or
Auto
Single or Repeat
Single, Repeat or
Auto
3
Pre-Trigger (⇒ p. 134) Sets pre-triggering.
-100 to 100%
(In steps of 1%,
or divisions)
(None)
-100 to 100%
(In steps of 1%,
or divisions)
4
Analog Trigger No. Selects the trigger number.
5
Analog Trigger Type
(
⇒ p. 140)
Selects the analog trigger type.
6
Unit and Channel No. Selectable only when [Expanded] is selected.
7
Trigger Level Set the signal level (threshold voltage) for triggering.
8
Trigger Slope Select the slope (input signal rising ↑, falling ↓ or both rising and falling ↑↓) for triggering.
9
Trigger Filter (⇒ p. 143) Sets the filter width (trigger filter) for triggering.
10
Events (⇒ p. 143) Sets the event count for triggering. (only with the [Expanded] setting)
11
Timing (⇒ p. 138)
Set the timing for triggered recording.
For Recorder function, set this when trigger timing is set to [Start &
Stop].
________