User Manual

7.1 Making Input Waveform Display Settings (Analog Waveforms)
165
7
Chapter 7 Waveform Display Settings
For each channel, you can set whether a waveform is to be displayed or not.
Waveform colors can be changed. The settings for analog channel are described
here.
Settings to display or hide logic waveforms and set their colors are described at:
See "Logic Waveform Display/Hide and Display Color Settings" (
⇒ p. 177)
7.1.1 Setting Whether a Waveform is Displayed or
Hidden, and its Color
Operating Key Procedure
1
SHEET/PAGE
Select the [One Ch] page.
2
Display or hide the waveform.
CURSOR
Move the cursor to the [Wave Disp] item.
F1 to F8
Select either choice.
3
Change the waveform’s display color (when displayed
[On]).
CURSOR
Move the cursor to the color item (colored rectan-
gle).
F1 to F8
Select the color to display.
Off The waveform is hidden.
On The waveform is displayed. (default setting)
Changing Whether a Waveform is Displayed or Hidden,
and its Color
To open the screen: Press the SET key → Select with the SUB MENU keys →Channel Settings scree
n
See To set from the Waveform screen (⇒ p. 128), To set in the Channel List (⇒ p. 124)
2
3
Select the channels to be displayed on the
Waveform screen from each page of the
Sheet Settings screen. Unless a display
channel is specified, it is not displayed on
the Waveform screen.
See "7.2.1 Assigning Display Data
to Sheets" (
⇒ p. 169)
To select from the Color List
Move the cursor to the color item, and
press the SELECT key.
The Color List appears.
Select a color with the CURSOR keys, and
press ENTER to accept it.
To verify or change settings for other channels
Press the SHEET/PAGE keys on the Chan-
nel Settings screen to select the [All Ch]
page. A list of the current channel settings is
displayed.
Waveform display settings can be verified in
the [Col] (Color) column.
To Change Settings:
Move the cursor to the color item for the
channel to be changed, and press one of the
F1 to F8 keys to make the change.
(F1 or F2: display or hide the waveform, F3 or F4: select the display color, F6 or
F7: display or hide all, or F8: revert to the default color setting)
A marker indicates the selected color.