User Manual

7.2 Setting the Screen Layout of the Waveform Screen (Sheet Settings Screen)
168
7.2 Setting the Screen Layout of the Waveform
Screen (Sheet Settings Screen)
[Analog] Page (⇒ p. 174)
[Logic] Page (⇒ p. 176)
Select the format for displaying recorded data
on each Sheet on the Waveform screen.
Select channels according to the types of waveforms to be displayed
.
[X-Y Comp] Page (⇒ p. 180) *
Channel to Display
on X-Axis
Set on the Sheet Settings screen. Setting choices are function-dependent.
Refer to the Analysis Supplement for FFT function setting details.
Display Position(⇒ p. 178)
Waveform
Color
Waveform Height
Adjustment (
⇒ p.
179)
Logic
Channel
All sheet settings can be reset.
Switch with the SHEET/PAGE keys.
Set this when the [X-Y Comp] or
[Wave & X-Y] display type is select-
ed (
⇒ p. 180).
Unit (Module) and
Channel Nos.
Display Graph
(Set for split-screen display)
Sheet No. (⇒ p. 169)
Sheet Name (
⇒ p. 171)
You can change the Sheet name.
Display Type of Recorded Data
(Waveform, numerical values,
or X-Y Composite)(
⇒ p. 171)
Split-Screen number (graphs) and
Display Pattern (⇒ p. 172)
Waveform Scrolling Direction
(⇒ p. 173)
Sample Display of Split Screen
(Graphs) and Display Pattern
Display/Hide Each
Channel (
⇒ p. 177)
Switch with the SHEET/PAGE keys.
Channel to Display on Y-Axis
Switch with the SHEET/PAGE keys.
Display Graph
(Set for split-screen display
)
[Wcal] Page *(Analysis Supplement )
Display Graph (set for split
-
screen display)
Calculation
Equation No.
* Memory function only