User Manual

7.2 Setting the Screen Layout of the Waveform Screen (Sheet Settings Screen)
169
7
Chapter 7 Waveform Display Settings
Measurement data can be split and displayed on up to 16 sheets on the Wave-
form screen.
Each sheet can be assigned analog, logic, X-Y, analog & logic, analog & X-Y
waveforms and numerical values.
The default setting is to display up to 32 analog waveform channels and 8 logic
waveform channels on one sheet, in sequential order beginning with module Unit 1.
Settings are not retained when an input module is added or replaced. If more
than 32 channels are selected, they are assigned to another sheet.
See Logic waveform display settings: "7.3 Displaying Logic Waveforms" (⇒ p. 176)
X-Y waveform display settings: "7.4 Composite Waveforms (X-Y Waveforms)" (
⇒
p. 180)
7.2.1 Assigning Display Data to Sheets
1
2
3
4
Operating Key Procedure
1
Sheet Assignment.
CURSOR
F1 to F8
Move the cursor to the [Sheet 1] item.
Select the number of the Sheet to set.
CURSOR
F1 to F8
Move the cursor to the [On] or [Off] item.
Select whether to display the selected sheet on
the Waveform screen.
2
Enter a Sheet Name (if you want to change it (⇒ p. 171).
3
Select the Display Type (⇒ p. 171).
(Default setting: Waveform)
4
([Waveform], [X-Y Comp], or [Wave&X-Y] is selected)
Select the number of split-screen divisions and display
pattern (as occasion demands) (⇒ p. 172).
When the [Waveform] display type is selected, you can select the
scrolling direction. (
⇒ p. 173) (Default setting: Horizontal)
5
Select the channels to display on the sheet.
SHEET/PAGE
To display analog waveforms:
Select the [Analog] page (
⇒ p. 174).
To display logic waveforms:
Select the [Logic] page (
⇒ p. 176).
To display X-Y composite waveforms:
Select the [X-Y Comp] page (
⇒ p. 180).
To display calculation waveforms:
Select the [Wcal] page (Analysis Supplement ).
Set other sheets in the same way.
Press the DISP key to display the Waveform screen.
The displayed sheet changes each time you press the SHEET/
PAGE key.
Off The selected sheet is not displayed.
On The selected sheet is displayed.
The Sheet Number appears.
Waveform Screen
5
Sheet Assignment
To open the screen: Press the SET key → Select with the SUB MENU keys →Sheet Settings screen
See Screen Layout (
⇒ p. 168)