User Manual

7.2 Setting the Screen Layout of the Waveform Screen (Sheet Settings Screen)
171
7
Chapter 7 Waveform Display Settings
A name can be assigned to each sheet. The sheet name appears on the status
bar of the Waveform screen.
To switch sheets on the Waveform screen, press the SHEET/PAGE keys.
Measurement data can be displayed as waveforms, numerical values, or X-Y
composites on the Waveform screen.
Select the type of display for the Waveform screen.
7.2.2 Assigning a Sheet Name
Operating Key Procedure
1
CURSOR
Move the cursor to the [Sheet Name] item.
2
F1 to F8
Enter a name (⇒ p. 65).
(up to 8 characters)
(When you enter a sheet name other than the de-
fault, it is displayed to the right of the waveform.)
Sheet Name Setting
To open the screen: Press the SET key → Select with the SUB MENU keys →Sheet Settings screen
See Screen Layout (
⇒ p. 168)
7.2.3 Setting the Display Type
Operating Key Procedure
1
CURSOR
Move the cursor to the [Display Type] item.
2
F1 to F8
Select the type of data to be displayed.
With the Memory Function
With the Recorder Function or the Real-Time
Saving Function
Waveform Displays waveforms.
Numeric
Displays numerical values.
X-Y Comp Displays X-Y composite waveforms
.
Wave & X-Y Displays both waveforms and X-Y
composite waveforms.
Waveform Displays waveforms.
Numeric
Displays numerical values.
Waveform screen display example
(
⇒ p. 20)
Numerical values display
"8.13 Viewing Waveform Data as Numer
-
ical Values" (⇒ p. 214)
Display Type Setting
To open the screen: Press the SET key → Select with the SUB MENU keys →Sheet Settings screen
See Screen Layout (
⇒ p. 168)