User Manual

7.2 Setting the Screen Layout of the Waveform Screen (Sheet Settings Screen)
173
7
Chapter 7 Waveform Display Settings
You can change the waveform display orientation. This setting is available only
when the [Waveform] display type is selected.
Operating Key Procedure
When the [Waveform] display type is selected and Split-
Screen is set to [2 Graphs] or more, set the split-screen dis-
play method.
1
CURSOR
Move the cursor to the [Pattern] item.
2
F1 to F8
Select the display pattern.
A display sample appears below the setting item.
Pattern 1 Split into same-size portions.
Pattern 2 (valid for 3, 4 or 6 graphs)
Graph 1 is displayed larger than the re
-
maining graphs, displayed at the same
(smaller) size.
With a 6-graph split, Graphs 1 and 2 are
large and the other graphs are displayed
at the same (smaller) size.
Pattern 2
Pattern 1
Split Screen: [3 Graphs] case
G1
G2
G3
G1
G2
G3
Pattern Settings
To open the screen: Press the SET key → Select with the SUB MENU keys →Sheet Settings screen
See Screen Layout (
⇒ p. 168)
Setting Example
7.2.5 Setting Waveform Scrolling Orientation
Operating Key Procedure
1
CURSOR
Move the cursor to the [Scroll] item.
2
F1 to F8
Select the type of data to be displayed.
Horizontal Draw waveforms horizontally
(left-to-right) on the screen. (de
-
fault setting)
Vertical Draw waveforms vertically (top
-
to-bottom) on the screen.
Cont
(Continuous)
Draws waveforms sequentially
from one graph to the next, start
-
ing at the top (when Split-Screen
is set to other than [1 Graph]).
Horizontal
Vertical
Cont
The timebase can
be set very long.
Minimizes overlap
when viewing many
waveforms.
Trends over the
whole waveform
can be viewed.
Scrolling Orientation Setting
To open the screen: Press the SET key → Select with the SUB MENU keys →Sheet Settings screen
See Screen Layout (
⇒ p. 168)
Setting Example