User Manual

7.2 Setting the Screen Layout of the Waveform Screen (Sheet Settings Screen)
175
7
Chapter 7 Waveform Display Settings
To reset, clear or re-order assignments
Move the cursor to the [Reset Chs] button, and select F1 [Reset Chs]. A dialog
appears.
Select an item with the CURSOR keys, and press the F1 key.
To reset graphs (when Split-Screen is enabled with [2 Graphs] or more)
Move the cursor to the [Reset Graphs] button, and select F1 [Reset Graphs].
A dialog appears.
Select an item with the CURSOR keys, and press the F1 key.
Channels assigned to current displayed Sheet numbers are rea
s-
signed beginning with No. 1 in order of input module installation
.
Erases the settings.
Re-sort channels to be displayed in order from the top.
Disable (set to [Off]) channels to be hidden, then select this butto
n.
Resets all sheet settings and reassigns them beginning with No
. 1
on Sheet 1 in order of input module installation.
Graph numbers are assigned sequentially depending on th
e
number of split-screen graphs.
After disabling (set to [Off]) channels to be hidden, resetting se
-
quentially reassigns the remaining (enabled) channels.
This is selectable only when using Timebase 1 and Timebase 2
.
Timebase 1 is assigned to G1, and Timebase 2 is assigned to G2
.