User Manual

7.3 Displaying Logic Waveforms
176
Settings such as those for measurement configuration are the same as for ana-
log waveforms.
Logic Waveform Display Setting Workflow
7.3 Displaying Logic Waveforms
[Use Ch] page on the Status Settings screen
• Enable the channels to us
e
(⇒ p. 85)
S
elect a measurement channel (Memory function and Real-time saving function only)
[Logic] page on the Channel Settings screen
Select which logic probes to display or hide, and their display colors
• Display/hide setting
(
⇒ p. 177)
• Waveform display color settin
g
(⇒ p. 177)
(Default setting: Off)
[Logic] page on the Trigger Settings screen
Set logic triggers (if triggers are to be applied)
• Logic Trigger settings
(
⇒ p. 153)
(Default setting: Off)
[Logic] page on the Sheet Settings screen
Set whether to display or hide logic channels, and the display position and display height for each
• Sheet Assignments
(
⇒ p. 177)
• Display Position setting
(
⇒ p. 178)
• Display Height setting
(
⇒ p. 179)
(Default setting: On)