User Manual

7.3 Displaying Logic Waveforms
177
7
Chapter 7 Waveform Display Settings
Set whether to display or hide the waveform for each logic channel probe.
7.3.1 Setting the Waveform Display
Logic Waveform Display/Hide and Display Color Settings
To open the screen: Press the SET key → Select with the SUB MENU keys →Channel Settings scree
n
Operating Key Procedure
1
Set whether to display or hide the waveform.
SHEET/PAGE
Select the [Logic] page.
CURSOR
Move to each probe ([1] to [4]) of the logic chan-
nel to set.
F1 to F8
Select either choice.
(To set whether to display or hide a group of channels
(L Ch))
CURSOR
Move the cursor to the [Lch] column.
F1 to F8
Select either choice.
2
Change the waveform display color (when set [On]).
CURSOR
Move to the color column for each probe ([1] to
[4]) of the logic channel to set.
F1 to F8
Select the color to display.
Off The waveform hidden.(default setting)
On The waveform is displayed.
1
All Off The waveforms are not displayed.
2
All On The waveforms are displayed.
Logic Channels
(Probe channels 1 to 4 of Logic Channe
l
A (L Ch A) of the LOGIC terminals)
Settings are also available from the dialog
displayed by selecting
F1 [All Settings].
Sheet Assignments (Logic Channels)
To open the screen: Press the SET key → Select with the SUB MENU keys →Sheet Settings screen
Operating Key Procedure
1
Select the channels to display on the sheet.
SHEET/PAGE
Select the [Logic] page.
CURSOR
Move the highlight cursor to the logic channel (L
Ch A, B, …) to be displayed, then move the cur-
sor to the [Disp] column.
F1 to F8
Set whether to display or hide the waveforms.
2
Set the display position (⇒ p. 178).
3
Set the display height (⇒ p. 179).
Off The waveforms are not displayed.
On The waveforms are displayed. (defaul
t
setting)
Logic Channels
(Probe channels 1 to 4 of Logic Channel A
(L Ch A) of the LOGIC terminals)