User Manual

7.3 Displaying Logic Waveforms
178
The logic waveform display position can be set for each channel.
When recording a mix of analog and logic waveforms, overlapping of waveforms
on the display can be minimized by setting the display position and height.
Printing Position
When [Normal] or [Narrow] is selected, waveforms print at the same relative
positions as on the display. When [Wide] is selected, printing positions are as fol-
lows.
7.3.2 Setting the Display Position
Logic Waveform Display Settings
To open the screen: Press the SET key → Select with the SUB MENU keys →Sheet Settings screen
Operating Key Procedure
1
SHEET/PAGE
Select the [Logic] page.
2
CURSOR
Move the cursor to the [Position] column.
3
F1 to F8
Set the display position numbers of the wave-
forms.
Setting the display height affects the range that
can displayed. (
⇒ p. 179)
• When the display height is set to [Wide]:
The highest number position that can be dis-
played is [Pos 4].
• When the display height is set to [Narrow]:
The highest number position that can be dis-
played is [Pos 16].
4
F3
Select [Set].
When a position number is duplicated by two
channels:
The position number of the duplicated channel is
automatically changed to another number.
Wide
Position
1
1
2
3
4
5
6
7
8
Normal
Display Height
Narrow
1
3
5
7
9
11
13
15
2
4
6
8
10
12
14
16
2
3
4
Display
Position 1
2
3
4
1
2
3
4
Print