User Manual

7.3 Displaying Logic Waveforms
179
7
Chapter 7 Waveform Display Settings
Display Position Setting Example when Recording Mixed Analog and Logic
Waveforms
The display height of logic waveforms can be modified.
Viewing is improved by setting a narrow display height when many waveforms
are displayed.
Numbering changes when changing the display position
If a duplicate position number is accepted for a channel, or if another screen is
displayed without accepting assignments, the position number of the duplicated
channel is automatically changed.
• When priority is given to the position number of the changed channel
Place the cursor on the position number of the channel to be given priority, and
select [Set]. The other (duplicated) channel is assigned the next available
higher number.
• When the position number is duplicated and another screen is displayed with-
out selecting [Set], or when [Set] is selected while the cursor is placed on a
non-duplicated channel.
The duplicated position number is reassigned the next available higher (L Ch
A) number.
[Normal] Case
7.3.3 Setting the Display Height
Logic Waveform Display Height
To open the screen: Press the SET key → Select with the SUB MENU keys →Sheet Settings screen
Operating Key Procedure
1
SHEET/PAGE
Select the [Logic] page.
2
CURSOR
Move the cursor to the [Height] item.
3
F1 to F8
Set the display height of the waveforms.
Wide Wide display height.
Normal Normal display height. (default setting)
Narrow Narrow display height.
Wide Normal Narrow