User Manual

7.4 Composite Waveforms (X-Y Waveforms)
181
7
Chapter 7 Waveform Display Settings
Operating Key Procedure
5
Set whether to display or hide composite waveforms,
and display color.
SHEET/PAGE
Select the [X-Y Comp] page.
CURSOR
Move the cursor to the [Col] (Color) column for
the No. to be displayed.
F1 to F8
Select [On] to display the waveform.
When [On] is selected:
F1 to F8
Select the color to display.
6
Assign channels to the X and Y axes.
CURSOR
Move the cursor to the [X-Axis] and [Y-Axis] col-
umns.
F1 to F8
Select the channels to display on the X and Y ax-
es.
7
Select the Graph for display.
(When Split-Screen is enabled for [2 Graphs] or more, or [Wave & 2
Comp] is selected)
CURSOR
F1 to F8
Move the cursor to the [Graph] column.
Select the graph number for display.
A sample of the Graph number (G1, G2, …) is
displayed at the left side of the screen.
8
Verify the composite waveform on the Waveform screen.
DISP
The Waveform screen appears.
Off The composite waveform is not displayed
.
(default setting)
On The composite waveform is displayed.
By selecting F1 [All Settings] in the [No.
]
column, these settings can be made from
a dialog. (
⇒ p. 182)
567
[2 Graphs] Case
To display a gauge
Press the FUNCTION MODE key to enable the FN mode, then press F2 [Gauge].