User Manual

185
8
Chapter 8 Waveform Screen Monitoring and Analysis
Waveform Screen Monitoring
and Analysis Chapter 8
Open the Waveform screen
Analytical operations such as display magnification, compression, and search are available on the Wave-
form screen. Measurement configuration and related settings can also be changed.
About screen contents:
"2.4 Waveform Screen" (
⇒ p. 19)
2
Select the Sheet
to display
1
Waveform Magnification/Compression
• Horizontal axis magnification/compression
(
⇒ p. 204)
• Vertical axis magnification/compression
(
⇒ p. 205)
• Magnification of partial data (Zoom) (⇒ p. 206)
• Arbitrary setting of vertical display range and
position (Variable function) (
⇒ p. 208)
Waveform Scrolling (⇒ p. 186)
Display Switching
• Waveform display (Normal)
• Sheet switching (⇒ p. 169)
• Input level display (⇒ p. 192)
• Gauge display (
⇒ p. 191)
• Info display of measured values, calculation
results and etc.(
⇒ p. 189)
• Numerical values display (
⇒ p. 214)
Cursor Measurements
• Specifying A/B cursors (⇒ p. 193)
• Time and frequency (vertical cursors) (
⇒ p. 197)
• Voltage (horizontal cursors) (⇒ p. 199)
• Time and voltage (trace cursors) (
⇒ p. 200)
Changing Settings on the Waveform
Screen
• Measurement configuration settings (timebase,
recording length, etc.)*
1
(⇒ p. 108)
• Input channel settings*
2
(⇒ p. 128)
• Trigger criteria settings*
1
(⇒ p. 161)
*1. Make settings at upper part of screen.
*2. Set in a dialog.
Items Available for Waveform Setting and Analysis (Waveform Screen)
Memory Block Display
• Viewing waveforms in every block (⇒ p. 213)
• Overlaying reference waveforms (
⇒ p. 105)
Searching Waveforms Displaying a Specified Location
(Jump Function) (⇒ p. 188)
• Trigger Search (⇒ p. 216)
• Time Search (
⇒ p. 221)
• Maximum/Minimum Value Search (
⇒ p. 222)
• Moving Cursor to Search Location(
⇒ p. 188)
• Moving to a Trigger Location
• Moving to a Searched Location
• Moving to a Cursor Location
• Moving to a Specified Location