User Manual

8.3 Specifying a Display Location (Jump Function)
188
When the recording length of a waveform is long or when the desired portion is
off-screen, you can specify the portion to be displayed immediately. This opera-
tion is available with the following functions:
• Memory Function
• Recorder Function
• Real-Time Saving Function
Display location can be specified as follows:
• Trigger point
• A/B cursor location
• Location found by search function (only with Memory and Real-Time Saving
functions)
• Specified location (from the beginning [0%] to the end [100%] of the wave-
form)
*1. Perform a search using the search function beforehand (⇒ p. 215).
*2. Selectable only when the A/B cursors are enabled.
8.3 Specifying a Display Location (Jump Func-
tion)
Trig Displays the location of a trigger event.
Search Displays the location found by the last search operation.*1
A Cursor Displays the location of cursor A.*2
B Cursor Displays the location of cursor B.*2
0% to 100% Displays the specified location.
0% 50% 100%75%25%
Use the CURSOR keys to move the curso
r
to the function menu, and press th
e
SELECT key.
A pull-down menu appears.
Use the CURSOR key to move the cu
r-
sor to [Jump], and press the CURSO
R
key.
Use the and CURSOR keys to sele
ct
the item to display, and press the ENTE
R
key.
The waveform at the selected display loca
-
tion appears.
1
2
3