User Manual

8.4 Displaying Measured Values and Information
189
8
Chapter 8 Waveform Screen Monitoring and Analysis
You can select the type of information (A/B cursor values, channel setting val-
ues) and the gauge display method to be displayed with waveforms. If the infor-
mation is obscured by overlapping waveforms, it can be displayed in a separate
screen region. However, these functions are available only when the Display
Type is set to [Waveform] and the scrolling direction (Scroll) is [Horizontal].
See "7.2.3 Setting the Display Type" (⇒ p. 171),
"7.2.5 Setting Waveform Scrolling Orientation" (
⇒ p. 173)
Display Method Switching (Displaying Waveforms, Information and
Gauges Separately)
8.4 Displaying Measured Values and Informa-
tion
[Wave+Info]
Split display showing waveforms
and information separately
[Wave]
Normal Display
DISP key
[Gauge+Wave]
Waveforms and gauge display
[All]
Split display showing waveforms,
information and a gauge separately
Press the DISP key repeatedly to change the display method.
Pressing the DISP key opens the Display dialog in which to select a display method. Selections in this
dialog are available using the F keys.
Press the ESC key or an F key to close the dialog.
Display Dialog
The content of displayed infor-
mation can be switched.
(
⇒ p. 190)
Displayed information ma
y
include channel informatio
n
and calculation results.
Gauge
You can select which
channel the gauge
applies to.
(
⇒ p. 191)
Input levels can be displayed on waveforms.(⇒ p. 192)
Display Method
(Select by F keys)