User Manual

8.5 Applying Gauges
191
8
Chapter 8 Waveform Screen Monitoring and Analysis
Gauges corresponding to the measurement range of each channel can be dis-
played at the left side of the screen. Measurement values can be verified on the
gauges.
8.5 Applying Gauges
FN
1
2
(FN: FUNCTION MODE)
F2
To hide gauges:
Set the display item to [Off].
Numerical values (⇒ p. 189) and the level
monitor (⇒ p. 192) can be displayed
together with gauges.
Press the FUNCTION MODE key to enable the FN mode, then press F2 [Gauge].
The Gauge dialog appears. Gauges to be displayed can be selected as occasion demands.
Press the ESC key or the F8 [Close] key to close the dialog.
Gauges can also be displayed by pressing the DISP key.(⇒ p. 189)
Gauge
F2 Key
(Split-Screen Graph Displays (⇒ p. 172))
A gauge is displayed for each graph.
Gauge Display
Gauge display colors match their correspond-
ing waveforms.
Normal Display
F2 Key
Using the CURSOR keys, move the cursor into
the dialog and select the channels for which to
display a gauge.
For XY-composite waveforms, select a wave-
form (No.) that has been enabled on the [X-Y
Comp] page of the Sheet Settings screen.
To choose which gauges to display: select channels in the dialog