User Manual

8.8 Cursor Values
197
8
Chapter 8 Waveform Screen Monitoring and Analysis
Displays the time and frequency values at the A/B cursors, or the difference in
times and frequencies between the A/B cursors.
About cursor values:
See "8.8.1 About Cursor Types and Values" (⇒ p. 195)
8.8.2 Reading Time and Frequency (Vertical Cursors)
1
2
3
4
5
Set this only when the number o
f
cursors (Num) is set to [2].
To perform partial composition or calcula
-
tion, specify the desired range.
• XY composition ("Making Partial Com
-
posites" (⇒ p. 182))
• Numerical value calculations
(
⇒ p. 193)
• Waveform calculations (
⇒ p. 193)
Calculation settings: Analysis Supple-
ment
Vertical Cursor Settings
To open the screen: Press the DISP key → Waveform screen
Operating Key Procedure
1
Select the Cursor Type.
CURSOR
F2
Move the cursor to the [Type] item.
Select
[Vertical].
(The selection can also be made by pressing the
TYPE key)
2
Select the number of cursors to enable.
CURSOR
F1 to F8
Move the cursor to the [Num] item.
Select either choice.
3
(When 2 cursors are enabled)
Select the cursor motion method.
CURSOR
F1 to F8
Move the cursor to the [Motion] item.
Select either choice.
4
Select the cursor speed.
CURSOR
F1 to F8
Move the cursor to the [Speed] item.
Select either choice.
(The selection can also be made by pressing the
SPEED key)
5
Select the Axis to serve as the origin of cursor move-
ment.
(Only when using the Timebase 2 with the Memory function)
CURSOR
F1 to F8
Move the cursor to the [Axis] item.
Select either choice.
1 Enable only cursor A. (skip to Step 4)
2 Enable both A/B cursors. (continue to Step 3)
Independent The A/B cursors move independently.
Together The A/B cursors move together.
Fast, Medium or Slow
Timebase 1 or Timebase 2
Display the dialog
Press the TYPE key.
The [A/B Cursor] dialog appears.
(It also appears by pressing Knob A)
The TYPE and SPEED keys can be used regardless of cursor position
.
Knob A
Knob B
Cursor Type
Speed of Cursor Motion