User Manual

1.2 Features
9
1
Chapter 1 Overview
You can find various characteristics in any measured data by specifying search
criteria.
See "8.14 Searching a Waveform" (⇒ p. 215)
Operable using a commonly available mouse or keyboard.
GUI screen displays are optimized to simplify both key operations and settings.
See "3.3 Common Operations" (⇒ p. 62)
A thermosensitive recording printer with thermal line head can be installed in the
instrument.
Specify and print sections of waveforms as occasion demands.
You can also print captured screen images, numerical value data and reports.
See "Chapter 11 Printing" (⇒ p. 297)
Measurement data, settings and images can be recorded to PC Cards (optional
Flash ATA Cards), floppy disks, MO and hard disks.
Either the Model 9717 MO Unit or 9718 HD Unit optional drive can be installed.
The Model 9716 FD Drive (floppy drive) can be connected to the instrument’s
USB port.
Two PC Card slots are provided, so an interface card and a Flash ATA card can
be used at the same time.
See "10.1 Storage Media" (⇒ p. 244)
An HTTP server is installed. There is no need to install special applications on a
PC: instrument settings and screen monitoring can be performed on a PC run-
ning Internet Explorer.
By connecting to a shared folder, measurement data from the instrument can be
saved on a PC.
See "Chapter 13 Communications Settings" (⇒ p. 359)
"10.1.6 Using a Network Shared Folder" (
⇒ p. 249)
Search function
Enhanced operability provided by GUI and support for a
mouse or keyboard
Optional thermal printer
Support for a variety of recording media and external storage
systems (optional MO, hard disk and floppy disk drives)
Built-in LAN interface (100Base-TX)