User Manual

8.14 Searching a Waveform

215

Chapter 8 Waveform Screen Monitoring and Analysis

Any location within measured waveform data that satisfies the search criteria

can be found and displayed. Search criteria can be specified as trigger criteria,

peaks and times. These are available only with the Memory and Real-Time Sav-

ing functions.

• Trigger Search (⇒ p. 216)

Specify trigger criteria to find locations that meet those criteria.

• Peak Search (⇒ p. 222)

Select the maximum, minimum, local maximum or local minimum location to

find.

• Time Search (⇒ p. 221)

Specify any time to locate on the waveform.

Search markers are placed wherever search criteria are satisfied.

Also, A/B cursors can be moved to the search marker locations.

8.14 Searching a Waveform

Press the FUNCTION MODE key to enable the

FN mode, then press F7 [Search].

The SEARCH dialog appears.

Press the ESC key or the F8 [Close] key to close

the dialog.

The [SEARCH] dialog box appears.

(FN: FUNCTION MODE)

Waveform display

Numeric display

Markers

Set search criteria.

Select the search type.

(Example of Trigger Search settings)

A cursor can be moved to a found

search location.