User Manual

8.14 Searching a Waveform
217
8
Chapter 8 Waveform Screen Monitoring and Analysis
Trigger Criteria Search
To open the screen: Press the DISP key → Waveform screen
Operating Key Procedure
1
FUNCTION MODE
F7
Display [FN] mode.
Select [Search].
The [SEARCH] dialog box appears.
2
Select the contents to find.
CURSOR
F1
Move the cursor to the [Method] item.
Select [Trigger].
3
Select the search range.
CURSOR
F1 to F8
Move the cursor to the [Range] item.
Select either choice.
4
Select the trigger search criteria.
(Trigger criteria settings for Analog No. 1 to No. 8, or Logic No. 1 to
No. 4)
CURSOR
F1 to F8
Move the cursor to the [Source] item.
Select either choice.
2
4
3
Whole Searches all waveforms (default set
-
ting).
Block (only for the Real-Time Saving func
-
tion)
Searches the currently loaded mea
-
surement waveform block.
AB Cursor Searches between A/B cursors.
When only one cursor is enabled
,
searches forward from the cursor loca
-
tion.
AND Searches for the condition in which al
l
trigger criteria are met.
OR Searches for the condition in which
any of the trigger criteria is met.
Select No. Searches only using the currently dis
-
played search criteria (default setting)
.
Because searching is timebase-depen
-
dent, waveforms measured with differen
t
timebases must be searched separately
.
Select the timebase to search as the [Axis
]
setting.
See "Select which timebase to search (if
measured using two timebases)."
(
⇒ p. 218)