User Manual

8.14 Searching a Waveform
222
You can select to search for the maximum, minimum, local maxima and local
minima of recorded measurement data.
8.14.3 Searching for Peaks
Peak Search
To open the screen: Press the DISP key → Waveform screen
Operating Key Procedure
1
FUNCTION MODE
F7
Display [FN] mode.
Select [Search].
The [SEARCH] dialog box appears.
2
Select the contents to find.
CURSOR
F3
Move the cursor to the [Method] item.
Select [Peak].
3
Select the search range.
CURSOR
F1 to F8
Move the cursor to the [Range] item.
Select either choice.
4
Select the type of peak to search for.
CURSOR
F1 to F8
Move the cursor to the [Type] item.
Select either choice.
5
Select the channel to be searched.
CURSOR
F1 to F8
Move the cursor to the [Ch] item.
Select the input module (Unit) and channel num-
ber data to be searched.
2
3
4
5
7
6
Select ( ) [Auto
Close] to have the di
-
alog close automati-
cally after searching.
Whole Searches all waveforms (default set
-
ting).
AB Cursor Searches between A/B cursors.
When only one cursor is enabled
,
searches forward from the cursor loca
-
tion.
Maximum Search for the maximum value (de
-
fault setting).
Minimum Search for the minimum value.
Maximal Search for a local maximum value.
Minimal Search for a local minimum value.
[Maximal]
[Maximum]
2
1
1
First Search
Next Search
Search After Next
3
When searching local maxima and
minima
Click the [Next] button to locate the next
local maximum or minimum after the cur-
rent location.
S
S
S
S