User Manual

9.2 Setting and Analysis Workflow
229
9
Chapter 9 Measuring with Real-Time Saving
Input Channel Settings
Make settings on the Channel Settings screen.
Press the SUB MENU keys to select the
menu
Press the SHEET/PAGE keys to select the
[One Ch] page
6
Select the Unit (module) and Channel
7
Select the measurement range (vertical axis)
Make input-module-related settings
8
Perform zero adjustment
9
(As occasion demands)
Set the scaling, waveform colors and
zero position
Display Sheet Settings
(If you want to change the layout of the waveform
screen to show any combination of channels)
Set on the Sheet Settings screen.
Press the SUB MENU keys to select the
menu
10
(As occasion demands)
Select the Screen Layout
Set the number screen divisions and the
split-screen layout
11
Select the channels to display
Start of Measurement
Press the START key (the green LED lights).
7
9
6
8
See "Chapter 5 Input Channel Settings" (⇒ p. 109),
"7.1 Making Input Waveform Display Settings (Analog
Waveforms)" (⇒ p. 164) in this manual,
"Chapter 3 Input Channel Settings" in the Input Modul
e
Guide
(after warm-up
)
11
S
ee "Chapter 7 Waveform Display Settings" (⇒ p. 163)
Combination of
display
channels
10
Up to 32 channels can b
e
displayed per sheet.
Data acquisition