User Manual

9.3 Pre-Measurement Settings
233
9
Chapter 9 Measuring with Real-Time Saving
5
3
2
4
Operating Key Procedure
1
SHEET/PAGE Select the [Basic] page.
2
Specify the save destination.
CURSOR
Move the cursor to the [Save in] item.
F1 Select [Edit].
The [Browse Folders] dialog box appears.
CURSOR Move the cursor to the save destination of the
storage media.
F1
Select [OK].
The dialog box closes.
3
Set the save name (if you want to change the name).
CURSOR
Move the cursor to the [Name] item.
F1 to F8
Enter the save name.(default setting: REAL)
See "Entering Text and Comments" (
⇒ p. 65)
4
Select the contents (Name Pattern) to be automatically
added to the save name
CURSOR
Move the cursor to the [Name Pattern] item.
F1 to F8
Select the contents to be automatically added to
the save name
5
Set the timebase [Sampling] of the measurement wave-
form.
CURSOR
Move the cursor to the [Timebase] item.
F1 to F8
(Switch Display: F8)
Set the time per division (timebase) on the
horizontal axis for recording the measure-
ment waveform.
The (linked) sampling rate is changed according-
ly. (The sampling rate can also be set directly.)
Select the storage media:
CURSOR
Open the layer below:
CURSOR
Numbering Appends serial numbers beginning
with 0001 as a suffix to the save name
.
Trig (suffix) Appends the trigger date and time as a
suffix to the save name.
Trig (prefix) Appends the trigger date and time as a
prefix to the save name (default set
-
ting).
100, 200, 500 μs/div,
1, 2, 5, 10, 20, 50, 100, 200, 500 ms/div
1, 2, 5, 10, 30, 50, 100 s/div
1, 2, 5 min/div
Setting Recording Conditions
To open the screen: Select with the SUB MENU keys →Status Settings screen
1
Available space on save destination
storage media
Measurement is disabled if the available
space at the save destination is less than
3 MB.
Saved files
A folder is created with the save name
,
and each file is saved in this folder. If a
folder with the same name already exists
,
a four-digit serial number is appended to
the save name (for example
,
REAL_0001).
See: "File/Folder Organization for Real
-
Time Saving" (⇒ p. 237)
For an example of file names created by
the [Name Pattern] setting: (
⇒ p. 256)
When saving to a shared folder on a
computer
See: "10.1.6 Using a Network Shared
Folder" (
⇒ p. 249)
The available timebase settings may be
limited by the save destination and the
number of channels used (
⇒ p. 237)
When the timebase is 100
μs/div or 200
μs/div
The waveform is not displayed while mea
-
suring.
The available space on the selected stor
-
age media is displayed by selecting the
[Update] button at the bottom of the
screen.