User Manual

9.3 Pre-Measurement Settings

235

Chapter 9 Measuring with Real-Time Saving

Operating Key Procedure

Select the recording method

CURSOR

Move the cursor to the [Trigger mode] item.

F1 to F8

Select the setting method for the recording

length.

Single Record only once (default setting).

Repeat Until you press the STOP key, recording

repeats at intervals of the set recording

length.

Timer Recording begins and ends at the speci

fied recording start and stop times.

Timer settings

The setting procedure is the same as fo

the timer trigger.

See: "6.9 Trigger by Timer or Time Inte

vals (Timer Trigger)" (⇒ p. 156)

Select each channel

To open the screen: Select with the SUB MENU keys →Channel Settings screen

See "Chapter 5 Input Channel Settings" (⇒ p. 109) and Input Module Guide

Set the waveform display

To open the screen: Select with the SUB MENU keys →Sheet Settings screen

See "Chapter 7 Waveform Display Settings" (⇒ p. 163)

• When measuring with the Real-Time Saving function, Display sheet settings set with the Memory func

tion are applied to the Real-Time Saving function.

• Sheet settings for the Model 8958 16-Ch Scanner Unit are canceled, so to measure with the Memor

function after measuring with the Real-Time Saving function, first reset the Sheet settings as occasio

demands.