User Manual

2.1 Operating Keys
13
2
Chapter 2 Operating Keys and Screen Contents
Operating Keys and Screen
Contents Chapter 2
2.1 Operating Keys
2
3
1
4
5
6
7
Selects screens (⇒ p. 14)
Control instrument operations such as measurement start/stop an
d
manual save/print
Makes input waveform-related settings (⇒ p. 16) (select modules
and channels, timebase, measurement range and set zero position
)
Sets A/B cursors (⇒ p. 15)
(To specify a waveform range, and read values at cursors)
Scrolls waveforms (
⇒ p. 15)
Selects setting choices and character entry (
⇒ p. 15)
Selects setting choices or functions (
⇒ p. 14)
1
(Start/Stop Measurement, Manual Save, Printing Control)
STANDBY/ON key
Activates the Standby state.
(The Standby state minimizes the startup time required when turning
the instrument on by the POWER switch)
Lights red: Power-On state
Flashes red: Standby state
To cancel Standby state: Press the STANDBY/ON key again.
See "3.6 Turning the Power On and Off" in the Quick Start Manual
PRINT key
Prints measurement data stored in the instrument’s internal memory.
See "11.4 Making Manual Print (PRINT Key Output) Settings" (
⇒ p.
303)
FEED key
Pressing the FEED key feeds paper for as long as you press it.
(when the optional printer is installed)
SAVE key
Saves data to storage media.
See "10.3.5 Setting Manual Save (SAVE Key Output)" (
⇒ p. 263)
STOP key
Stops measurements.
Press twice to force measurement to halt immediately.
See "3.3.6 Starting and Stopping Measurement" (
⇒ p. 75)
START/MARK key
Starts measurement. The green LED at the left is lit during measure-
ment.
If you have set trigger criteria, the awaiting-trigger state activates.
See "3.3.6 Starting and Stopping Measurement" (
⇒ p. 75)