User Manual

9.4 Analyzing Data
239
9
Chapter 9 Measuring with Real-Time Saving
Viewing Waveforms After Measurement Stops
[Whole] is displayed when measuremen
t
finishes.
Move the cursor to the [Disp] setting item
and select F3 [All].
The whole waveform is displayed at the top, an
d
the measurement waveform at the bottom.
The framed portion of the whole waveform ind
i-
cates the currently displayed measurement wave
-
form.
F3
Loaded measurement
waveform area
Whole
Waveform
Measurement
Waveform
The measurement waveform can be scrolled wi
th
the SCROLL keys.
The framed area of the whole waveform is linke
d
for scrolling.
Yellow area: displayed whole waveform
Frame: displayed location of measurement waveform
(relative location of the frame within the whole waveform)
Upper bar: Specified [Load] location (relative location of the dotted line
within the whole waveform)
Lower bar: The location of the currently loaded measurement wave
-
form
Location and area of the
measurement waveform
displayed at the bottom
To view waveform data as numerical values
Waveform data can be displayed as numerical values. When the [Disp] setting item is set to [All],
the numerical values is displayed instead of the measurement waveform.
See: "8.13 Viewing Waveform Data as Numerical Values" (⇒ p. 214)