User Manual

9.4 Analyzing Data
240
1
Move the cursor to the [Load] setting item
,
and select the location (division number) o
f
the measurement waveform to display.
The (linked) dotted-line frame in the whole waveform
changes.
2
If the currently loading waveform is off-screen, the d
i-
rection of the waveform is indicated by a marker.
Move the cursor to the [Disp] button, and
select the F1 [Top] or F2 [End] key.
The measurement waveform is displayed at the
bottom.
With the SCROLL keys, select the loadin
g
location from the whole waveform at the top
.
Changing and loading the location of the displayed measurement waveform
Displays the start position for loading the measure-
ment waveform.
Displays the end position for loading the measure-
ment waveform.
To display a waveform that is off-screen.
F1
F2
Move the cursor to the [Load] button an
d
select F1 [Load].
The number of specified divisions of the measure
-
ment waveform is loaded.
3
To change waveform magnification
Move the cursor to the [Whole] (Whole waveform
)
or [Measure] (Measurement waveform) settin
g
item, and select the display magnification. Th
e
waveform is magnified or reduced by the specifie
d
magnification.
F1