User Manual

10.1 Storage Media
246
MO Disk Insertion & Removal
When a MO disk is inserted, the name of the storage media appears on the File
screen.
See "Storage Media Names" (⇒ p. 254)
Ejecting an MO Disk from the File Screen
Right Side of Instrument
W
hen Pressing the Eject Button Does Not Eject the MO Disk
F
ollow one of the procedures below to remove the disk.
•
Procedure 1
Turn on the POWER switch while pressing the eject button of the MO drive.
•
Procedure 2
Turn off the POWER switch and insert the supplied eject pin or a pin with a diameter
of
1 mm into the manual eject hole of the MO drive. The disk is ejected.
Eject Button & LED
Manual Eject Hole
Inserting an MO Disk
With the label on the eject button side
,
fully insert the MO disk in the directio
n
of the arrow.
Removing an MO Disk
Press the eject button. (An MO dis
k
can also be ejected by performing a
n
operation from the File screen. Se
e
below.)
MO Disk Slot
Model 9717 MO Unit
(Option)
2
1
3
1 Press the FILE key to display the File screen.
2 Use the CURSOR keys to select [MO] in the media list.
3 Press the F3 [Eject] key.
A confirmation dialog box appears.
4 Press the F1 [Execute] key. The MO disk is ejected from the MO unit.
To cancel ejecting, press the F2 [Cancel] key.