User Manual

10.1 Storage Media
249
10
Chapter 10 Saving/Loading Data & Managing Files
If a shared folder of a PC connected to the network is registered on the File
screen, data can be saved and loaded to/from the folder. Furthermore, you can
perform file operations in the same way as if the files were on the instrument.
10.1.6 Using a Network Shared Folder
The communication settings need to be configured to access a shared folder on
a PC. Before configuring settings on the File screen, connect to the PC to be
used.
See "13.1 Connection Configurations" (⇒ p. 360)
"13.2 Controlling the Instrument over the LAN Interface" (
⇒ p. 362)
Registering a Network Shared Folder
To open the screen: Press the FILE key → File screen
Operating Key Procedure
1
Open the dialog box.
FUNCTION MODE
Switch to [FN] mode.
F5
Select [Create Share].
The [Create Network Share Connection] dialog
box appears.
2
Enter the host name of the PC to which to connect.
CURSOR
F1 to F8
Move the cursor to [Host Name] and enter a host
name.
See "Entering Text and Comments" (⇒ p. 65)
After input, a dialog box appears.
3
Enter the user name and password for logging on to the
PC (if security has been set).
CURSOR
F1 to F8
Move the cursor to and enter the information for
each of [User Name] and [Password].
Select the [OK] button.
The names of the shared folder on the PC ap-
pears in the share list.
4
Connect to the shared folder.
CURSOR
F1
Move the cursor to the folder you want to share
from the share list and select the [Connect] but-
ton.
A dialog box appears.
5
Enter the user name and password for accessing the
shared folder (if security has been set).
CURSOR
F1 to F8
Move the cursor to and enter the information for
each of [User Name] and [Password].
Select the [OK] button.
Select the [Close] button.
When a connection is successfully established,
the storage media name (Network #1, etc.) ap-
pears in the File screen.
4
2
3
5