User Manual

10.2 Data Capable of Being Saved & Loaded
253
10
Chapter 10 Saving/Loading Data & Managing Files
Data Saving Rate_______________________________________________
The saving rate varies depending on factors such as the communication condi-
tions.
Saving Rate for Binary Format (Reference Value)
File Sizes _____________________________________________________
If a warning message appears during saving because of insufficient space
on the storage media, be sure to press the STOP key to stop measurement
before replacing the storage media. If the storage media is removed during
measurement, the data may be damaged.
(If the storage media specified for [Save in 1] becomes full during automatic
saving, the instrument can continue saving data to the storage media selected
for [Save in 2].)
See "Set the save method for the secondary save destination." (⇒ p. 261)
Storage Media Saving Rate Storage Media Saving Rate
Floppy Disk 14 KB/s
PC Card 450 KB/s
MO Disk (Built-in) 300 KB/s
LAN (Transfer to
Shared Folder)
630 KB/s
Hard Disk (Built-in) 1.2 MB/s
Data Type Size
Settings Data 386 KB
Measurement Data See "Appendix 2.2 Waveform File Sizes" (⇒ p. A19)
Screen Image Data BMP Color: Approximately 938 KB,
BMP Compressed Color: Approximately 100 KB,
BMP Grayscale: Approximately 100 KB,
PNG: Approximately 50 KB
• Files larger than 2 GB cannot be saved. In this case, specify a range to save
using the A/B cursors, and perform a partial save or divided save so that the
file size is smaller than 2 GB.
• The file sizes of BMP compressed color and PNG formats may vary greatly
depending on the images.
• The size of setting data files may be subject to change by version updates.