User Manual

2.1 Operating Keys
15
2
Chapter 2 Operating Keys and Screen Contents
4
Setting and Selecting (Selecting setting choices and entering charac-
ters)
See "3.3.3 Entering Text and Numbers" (⇒ p. 64)
ESC key
Removes the displayed dialog or virtual keyboard.
SELECT key
When the cursor is on a setting item: opens a pull-down menu.
When the cursor is on a character entry item: opens the virtual key-
board for character entry.
When using the virtual keyboard: enters the character selected by the
cursor.
HELP/CONV key
(Support planned in later version upgrade)
ENTER key
Accepts the setting choice selected on the pull-down menu or in the
dialog.
Using the virtual keyboard: when finished with your entry, accepts
the entry and closes the virtual keyboard.
CURSOR keys
Moves the cursor up, down, left and right on the screen.
(In this document, “CURSOR keys” indicates all of the CURSOR keys,
while “ ” indicates a specific CURSOR key or keys.)
KEY LOCK
(3sec)
Press and hold the CURSOR keys for three seconds to disable
key operations (Key-Lock function).
To cancel key-lock, hold the keys again for three seconds.
See "3.3.7 Disabling Key Operations (Key-Lock Function)" (⇒ p. 77)
5
SCROLL controls (waveform scrolling)
See "8.1 Scrolling Waveforms" (⇒ p. 186)
Jog
Scrolls waveforms left and right.
Shuttle
Scroll speed is determined by the rotation angle of the Shuttle knob.
To scroll waveforms automatically (Auto Scroll)
Turn the knob in the direction to scroll the waveform and hold it until
“Auto-Scroll” appears, then release it. The waveform scrolls automati-
cally.
To cancel: press any operating key.
Shuttle
Jo
g
6
A/B CURSOR (setting the A/B cursors)
See "8.8 Cursor Values" (⇒ p. 195)
TYPE key
Sets the A/B cursor type.
Press the key to display the settings dialog (Vertical, Horizontal or
Trace cursors).
SPEED key
Sets the speed of A/B cursor motion.
Press this key to display the currently set cursor speed at the bottom
of the screen (Fast, Medium or Slow).
A/B knobs
These knobs move the A/B cursors.
To move cursor A: turn inner knob A.
To move cursor B: turn outer knob B.
Press knob A to display the settings dialog.
Knob BKnob A