User Manual

2.1 Operating Keys

Input Waveform Settings

See "5.7 Setting Input Channels from the Waveform Screen" (⇒ p. 128)

"5.1 Analog Channel Settings" (

⇒ p. 110)

UNIT key

Selects a Unit (module) (Waveform or Channel Settings screen).

CH key

Select a channel (Waveform or Channel Settings screen).

RANGE/POSN

knobs

Sets the measurement range of the input channels, waveform display

position (zero position of the vertical axis), and whether or not they are

displayed (available on the Waveform and Channel Settings screens).

To set the measurement range: turn the inner RANGE knob.

To change the waveform display position (zero position): turn the

outer POSN knob.

To turn a waveform display on or off: press the inner RANGE knob.

TIME/DIV key

Sets the acquisition speed (timebase) for the input waveform (Wave-

form and Status Settings screens).

See "4.4 Setting Measurement Configuration on the Waveform

Screen" (

⇒ p. 108)

"4.2 Setting Measurement Configuration (Status Settings

Screen)" (⇒ p. 85)

RANGE

knob

POSN knob