User Manual

10.3 Saving Data
272
After acquiring data, the waveform screen is automatically saved as an image
file (BMP or PNG format).
10.3.9 Automatically Saving Display Images
2
3
4
5
6
Screen Auto Save
To open the screen: Press the SET key → Select with the SUB MENU keys →Save Settings screen
Screen Layout (
⇒ p. 38)
Operating Key Procedure
1
Set auto save (⇒ p. 261).
Set the save destination.
2
Enable display image saving.
CURSOR
Move the cursor to the [Screen Image] item.
F2
Select [On] (default setting).
3
Enter a save name (if you want to use a different name).
CURSOR
Move the cursor to the [Name] item.
F1 to F8
Enter the save name (Default setting: IMAGE).
See "Entering Text and Comments" (⇒ p. 65)
4
Select the contents (Name Pattern) to be automatically
added to the save name
CURSOR
Move the cursor to the [Name Pattern] item.
F1 to F8
Select the contents to be automatically added to
the save name
5
Select the save format type.
CURSOR
Move the cursor to the [Format] item.
F1 to F8
Select either choice.
Numbering Appends serial numbers beginning
with 0001 as a suffix to the save name
.
Trig (suffix) Appends the trigger date and time as a
suffix to the save name.
Trig (prefix) Appends the trigger date and time as a
prefix to the save name.(default set
-
ting)
BMP Color Saves a color BMP format file.
Comp BMP Saves a compressed color BMP for
-
mat file.
BMP Gray Saves a grayscale BMP format file.
PNG Saves a PNG format file.
[Auto Save] Page
Save Name
Up to 40 characters (single byte and dou
-
ble byte) can be used for the save name.
See "File Names" (⇒ p. 255)