User Manual

10.6 Examples of Saving Data: Reading Data on a PC
284
Example 3 of Saving Waveform Data as Text _______________________
"COMMENT","Timebase 2 Data Interpolation is ON"
"DATE","12-14-2004"
"TIME","13:23:52.760"
"NUM_SIGS",3
"INTERVAL",1.00000E-005
"HORZ_UNITS","s"
"VERT_UNITS","s","V","V"
"SIGNAL","TIME",”Timebase 1 Data" ,"Timebase 2 Data"
"DATA"
+0.000000000E+000,-1.4050E+002,-8.1250E-004
+1.000000000E-005,-1.4025E+002,-8.1250E-004
+2.000000000E-005,-1.4075E+002,-8.1250E-004
+3.000000000E-005,-1.4075E+002,-8.7500E-004
+4.000000000E-005,-1.4050E+002,-8.7500E-004
+5.000000000E-005,-1.4050E+002,-8.7500E-004
+6.000000000E-005,-1.4050E+002,-8.7500E-004
+7.000000000E-005,-1.4075E+002,-8.7500E-004
+8.000000000E-005,-1.4050E+002,-1.0625E-003
+9.000000000E-005,-1.4050E+002,-1.0625E-003
+1.000000000E-004,-1.4050E+002,-1.0625E-003
+1.100000000E-004,-1.4075E+002,-1.0625E-003
+1.200000000E-004,-1.4075E+002,-1.0625E-003
+1.300000000E-004,-1.4075E+002,-1.0625E-003
+1.400000000E-004,-1.4075E+002,-1.0625E-003
+1.500000000E-004,-1.4075E+002,-1.0625E-003
U
sing Timebase 1 & Timebase 2 with the Memory Function when Timebase 2
I
nterpolation is Set to [On]
W
hen Analog Channel 1-1 (Timebase 1) and 1-2 (Timebase 2) was Saved:
T
imebase 1: 1 ms/div (10 μs/S)
2: 50
μs/S
Line 1: Comment
If a title comment was entered, it is displaye
d
here.
Lines 2 to 3: Trigger Time
Line 7: Measurement Result Unit
Line 8: Signal Name
If a comment was entered for each data item, th
e
comments are displayed.
From Line 10: Measurement Data
Although there is space because two-axis data i
s
displayed in accordance with the sampling rate
,
interpolation is performed using the same data
for the space part.
Timebase Value Timebase 1 Value Timebase 2 Value