User Manual

10.6 Examples of Saving Data: Reading Data on a PC
287
10
Chapter 10 Saving/Loading Data & Managing Files
Creating a Graph from Waveform Data Imported into Excel
Example:
Creating a graph for the voltage values of
channels A1_1 and A1_2.
Click inside the cell containing the first data item
for the graph and press the Shift+Ctrl+End keys.
(All data up until the last data item is selected)
1
Click the Chart
Wizard button.
2
3
Select the “Line” chart type.
Set the display method an
d
other settings as required.
When different sampling rates were used for
measurement:
When a graph is to be created from data measured
using the Timebase 2, set the [Timebase 2 Interpo-
lation] setting on the Save Settings screen to [On]
and then save the data.
See
"10.3.7 Automatically Saving Waveforms" ( ⇒ p. 267)
"10.3.8 Optionally Selecting Waveforms & Saving
(SAVE Key)" (
⇒ p. 270)
4
When you want to specify a range and then cre-
ate a graph:
Click inside the cell containing the first data item for
the graph and then click the cell containing the last
data item while pressing the Shift key.
In this example, A1-1 data is assigned to the left vertical axis
,
A1-2 data is assigned to the right vertical axis, and time data i
s
assigned to the horizontal axis.
For details on how to configure graph set-
tings, refer to the Help function of Excel.
Click
Shift + Click