User Manual

2.3 Opening Screen
18
2.3 Opening Screen
This screen appears first after power on. (When you turn the power off with the Waveform screen dis
-
played, it reappears after this screen.) The boot process takes about 40 seconds.
Select a function with the F keys (F1 to F8). The Waveform screen appears when you select the function.
System Configuration List
This can be verified on the System screen (⇒ p. 49).
Selections
Select a function with the
F
keys (F1 to F8).
A list of the currently connected input modules appears.
Function Menu
Select a function before mea-
suring. Functions can be
changed from the Waveform
or Settings screens.
"4.1 Selecting the Function"
(
⇒ p. 80)
Clock
Shows the current time.
"12.3.1 Setting the Dat
e
and Time" (⇒ p. 347)
To return to the Opening
screen:
Exit or close all screens to re-
turn to the Opening screen.
Function Menu
Memory Function
Recommended for measuring in-
stantaneous waveforms.
Use to record relatively fast signals
with periods from µs to minutes.
R
ecorder Function
R
ecommended for long-term measurements.
R
ecords waveforms at slow speeds.
U
se to record relatively slow signals with peri-
o
ds from ms to hours.
File Operations
Displays the File screen.
Use this screen to load prev
i-
ously saved files and to othe
r-
wise manage files.
F1 F2 F3 F4 F5 F6 F7 F8
Details:"Choosing the Appropriate Function" (⇒ p. 81)
System Settings
Displays the System screen.
Use this screen to make system
environment-related settings.
Select this to set the clock.
FFT Function
Recommended for performing frequency analysis of rotat-
ing objects, vibrations, sounds and etc.
Spectral analysis and transfer functions are available.
Real-Time Saving Function
Recommended for long-term recording instea
d
of a data recorder. Measurement data is save
d
to the recording media in real time.