User Manual

2.4 Waveform Screen
19
2
Chapter 2 Operating Keys and Screen Contents
Parts of the displayed screen depend on the selected operating function.
Refer to the Analysis Supplement for details of the FFT function.
2.4 Waveform Screen
(To change sheets)
This is valid only when measure-
ment data has been assigned to
multiple sheets.
To open the Waveform screen
Press the DISP key
Press the
SUB MENU keys
(To change choices of setting items)
See "Setting Items and Choices" (⇒ p. 21)
(The Waveform screen appears)
Press the
SHEET/PAGE keys
Displays acquired data as waveforms or
numerical values.
To change the display type (Waveform,
numerical values or X-Y Composite):
See "7.2.3 Setting the Display Type" (⇒ p. 171)
To display any combination of recorded
data:
See "7.2.1 Assigning Display Data to Sheets"
(
⇒ p. 169)
(Example: Memory Function Waveform Screen)
F
unction Menu
S
elect a function before measur-
i
ng.
T
o change functions:(⇒ p. 80)
Internal and Externa
l
Connection Status
R
ecorded Data
S
hows data acquired with this
i
nstrument. (⇒ p. 20)
Setting Items and Choices (⇒ p. 21)
Measurement configuration and trigger criteria set-
tings can be changed. These can be changed while
measuring.
Press the SUB MENU keys to select the items to
change.
Clock
Shows the current time. You can
change the display appearance.
Clock setting procedure (
⇒ p. 347)
Setting Choices
(GUI area)
The cursor indicates th
e
current setting choice.
Select with F keys (F1 t
o
F8).
Press the FUNCTION
MODE key to change th
e
F key functions. (⇒ p. 25
)
S
croll Bar (⇒ p. 186)
S
crolls waveforms.
T
he width of the scroll bar indi-
c
ates the displayed area within
t
he overall recorded waveform.
Y
ou can use the mouse to
s
croll.
S
tatus Bar (⇒ p. 23)
T
his bar indicates the current
s
tates of data acquisition, inter-
n
al processing, settings and
d
isplay information.
“Key Lock” appears whe
n
the key-lock state is en
-
abled.
F-Key Function
Status
(⇒ p. 25)
Shows the current F ke
y
status.
A/B Cursor Settings Dialog
Select the type of cursors. (⇒ p. 195)
(Appears when you press the TYPE key or knob A)
O
n-screen changes can be
m
ade by clicking the mouse.
(
⇒ p. 68)
Sheet No.
Press the ESC key to
remove the dialog.
Input Channel Settings Dialog
Input channel settings can be changed. (⇒ p. 128)
(Appears when you press the UNIT or CH keys, or
press or turn the RANGE knob)