User Manual

11.2 Print Methods and Print Items
300
Available Printing types
The following printing types are available.
Use the Print Settings screen ([Printer] page of the [Print] menu) to select the content to print.
Type
(Print Example)
Content
Auto Print
(
⇒ p. 301)
Manual
Print
(
⇒ p. 303)
Print
Examples
Functions
Whole Wave *
1
(Whole Waveform)
Print the entire range of data acquired
by the instrument.
O
*3
O
(⇒ p. 323) OOOO
A-B Wave*
1
A-B Waveform
From the data acquired by the instru-
ment, print the data between the A and
B cursors.
Δ*
2
O
(⇒ p. 328) OO − O
Trig Wave*
1
(Pre- and Post-
Trigger Wave-
forms)
Print 10 divisions of the data before and
after a trigger event.
−
O
(⇒ p. 329) OO −−
Report
Prints the waveform data of the dis-
played area on the waveform screen,
upper and lower limits and analog chan-
nel settings.
−
O
(⇒ p. 329) OOOO
List
Print a list of settings made in the set-
tings screens.
−
O
(⇒ p. 330) OOOO
Calc Results
Calculation results
Print numerical calculation results.
Calculation settings are necessary.
See Analysis Supplement
O O
(⇒ p. 331) O −−−
Screen Image
Print the currently displayed screen.
−
O
(⇒ p. 331) OOOO
(Screen Link)
Print the appropriate type of data for the
display screen. (Print a waveform when
a waveform is displayed, and print a list
when something other than a waveform
is displayed.)
−
O
OOOO
*1. Waveforms or numerical values can be printed (Default setting: Waveform).
See "Recording Type Settings" (⇒ p. 311), Numerical Data Printing Examples (⇒ p. 327)
Waveforms can be printed with the addition of settings data, comments, gauges, and so on.
See"11.6.5 Printing Comments and Setting Data" (⇒ p. 321)
*2. With the Memory Function, printing is possible only when Roll Mode is disabled [Off]. First acquire the
data, then specify a range with the A and B cursors and set the print area to [A-B].
See"Print Area Settings" (⇒ p. 312)
*3: Cannot be executed with the Real-Time Saving function enabled.