User Manual

11.3 Making Auto Print Settings
301
11
Chapter 11 Printing
Make these settings before measurement. Check to be sure that recording paper
is loaded correctly. Measurement data is printed automatically when you press
the START key to start measurement.
11.3 Making Auto Print Settings
1
2
1
2
Auto Print Settings
To open the screen: Press the SET key → Select with the SUB MENU keys →Print Settings screen
See Screen Layout (
⇒ p. 39)
Operating Key Procedure
1
Enable Auto Print.
SHEET/PAGE
Select the [Printer] page.
CURSOR
Move the cursor to the [Auto Print] item.
F2
Select [On] (Default setting: Off).
When you also want to print numeric calculation
results:( only)
CURSOR
Move the cursor to the [Calculation Results] item.
F2
Select [On] (Default setting: Off).
CURSOR
Move the cursor to the [Real Time Print] item.
F2
Select [On] (Default setting: Off).
2
Set the output destination (waveform, numeric calcula-
tion results).
CURSOR
Move the cursor to the [Output Destination] item.
F1 to F8
Select either choice.
3
Make print settings as required for the printer (⇒ p. 307).
4
Make printout content settings as required (⇒ p. 311).
(The default setting is a Whole Waveform printout.)
Check the measurement conditions and start the measurement
(START key).
Printer Output to the internal printer (when an in
-
ternal printer is installed).
USB Output to the external printer.
(When the Memory Function is enabled)
1
(When the Recorder Function is enabled)
Even if Numeric Calculation Results is set
to [On], the results are not printed auto-
matically unless calculation settings have
been made.
See Analysis Supplement
To stop printing before it has finished
Press the STOP key. Measurement also
stops.
Printing can be paused and restarted dur-
ing Real-Time Printing (Recorder Func-
tion).(
⇒ p. 302)
External printers known to operate cor
-
rectly:
"External printers" (
⇒ p. 299)