User Manual

11.3 Making Auto Print Settings
302
Description Print Order
During Auto Printing of waveforms and numeric calculation results (both are set
to [On]), numeric calculation results are printed after waveforms.
When printing resumes, a divider line is printed before the waveform.
To print data prior to the current point:
Use the [Print] setting item to specify how many divisions prior the current point
to record. When you restart printing, the printout will begin with the specified
number of recorded divisions.
To print at the same time as waveform display (internal printer only)
When the Memory Function is enabled, Roll Mode (⇒ p. 99) allows you to print
at the same time that waveforms are displayed.
When the Recorder Function is enabled, printing is always done at the same
time as waveform display (Real-Time Print).
To pause and restart printing (during Real-Time Printing)
(Recorder Function only)
Move the cursor to the [Print] setting item, and press the F1 [Pause Print] key or
the F2 [Restart Print] key.