User Manual

11.4 Making Manual Print (PRINT Key Output) Settings
306
6
Operating Key Procedure
6
To print a report
(Printing Type: [Report])
Set the print size
CURSOR
Move the cursor to the [A4 Size] item.
F1 to F8
Select either choice.
7
Make print settings as required for the printer (⇒ p. 307).
8
Make printout content settings as required (⇒ p. 311).
9
Press the PRINT key.
The specified content is printed.
For print examples (
⇒ p. 323)
To stop printing before it has finished
Press the STOP key.
Off Print without condensing.(default setting)
On Print waveforms or text condensed hori
-
zontally to fit on A4-size paper.
If you want to print the display screen
Display the screen that you want to print.
If you want to print an A-B waveform
Set the A-B range on the waveform
screen. (
⇒ p. 306)
Before pressing the PRINT key
When [A-B Wave] is selected as the printing type
Set the start point and end point on the waveform screen with the A and B cur-
sors.
See "8.7 Specifying a Waveform Range" (⇒ p. 193)
A Whole Waveform is printed when no range has been set with the A and B cur-
sors, and when the A and B cursors are not displayed on the waveform screen.
Specified ranges of X-Y waveforms cannot be printed, even if you specify a
range with the A and B cursors.